Dungeon Dilettante
Posts: 1
Joined: Monday, 25th July 2016, 16:20
Monday, 25th July 2016, 16:56
No fonts in tiles version, Lubuntu
Why can't I see fonts in tiles version on Lubuntu? I've tried windowed, fullscreen, latest 18.1 version and ubuntu repo version 17.1. Also installed extra DejaVu ttf font pack in /usr/share/fonts/truetype/ from Ubuntu repo and updated font cache with sudo fc-cache -f -v command. Purged and reinstalled between tries. Fonts are normally visible in terminal version. Should I put some other font in dat/tiles/ folder? If so, what would be the exact commands that should be added in init.txt? New computer with Mint 17.3 has fonts in tiles version. Please help Linux newbie out.
lostman@northwood:~$ inxi -Fzx
System: Host: northwood Kernel: 4.4.0-31-generic i686 (32 bit gcc: 5.3.1)
Desktop: LXDE (Openbox 3.6.1) Distro: Ubuntu 16.04 xenial
Machine: Mobo: Micro-Star model: MS-6398E v: 1.0
Bios: American Megatrends v: 07.00T date: 04/02/01
CPU: Single core Intel Pentium 4 (-UP-) cache: 512 KB
flags: (pae sse sse2) bmips: 5255 speed: 2627 MHz (max)
Graphics: Card: NVIDIA NV25 [GeForce4 Ti 4200] bus-ID: 01:00.0
Display Server: X.Org 1.18.3 drivers: nouveau (unloaded: fbdev,vesa)
Resolution: 1280x1024@60.02hz
GLX Renderer: Mesa DRI nv25 x86/MMX/SSE2
GLX Version: 1.2 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
driver: snd_intel8x0 ports: d000 cc00 bus-ID: 00:1f.5
Sound: Advanced Linux Sound Architecture v: k4.4.0-31-generic
Network: Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too v: 0.9.28 port: bc00 bus-ID: 03:03.0
IF: enp3s3 state: unknown speed: 100 Mbps duplex: full
mac: <filter>
Drives: HDD Total Size: 220.1GB (4.7% used)
ID-1: /dev/sda model: ST3160815A size: 160.0GB
ID-2: /dev/sdb model: ST360021A size: 60.0GB
Partition: ID-1: / size: 146G used: 5.9G (5%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 472M used: 101M (23%) fs: ext2 dev: /dev/sda1
ID-3: swap-1 size: 1.07GB used: 0.07GB (6%) fs: swap dev: /dev/dm-1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 154 Uptime: 1:44 Memory: 433.8/1000.1MB
Init: systemd runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.3.461) inxi: 2.2.35
lostman@northwood:~$ inxi -Fzx
System: Host: northwood Kernel: 4.4.0-31-generic i686 (32 bit gcc: 5.3.1)
Desktop: LXDE (Openbox 3.6.1) Distro: Ubuntu 16.04 xenial
Machine: Mobo: Micro-Star model: MS-6398E v: 1.0
Bios: American Megatrends v: 07.00T date: 04/02/01
CPU: Single core Intel Pentium 4 (-UP-) cache: 512 KB
flags: (pae sse sse2) bmips: 5255 speed: 2627 MHz (max)
Graphics: Card: NVIDIA NV25 [GeForce4 Ti 4200] bus-ID: 01:00.0
Display Server: X.Org 1.18.3 drivers: nouveau (unloaded: fbdev,vesa)
Resolution: 1280x1024@60.02hz
GLX Renderer: Mesa DRI nv25 x86/MMX/SSE2
GLX Version: 1.2 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
driver: snd_intel8x0 ports: d000 cc00 bus-ID: 00:1f.5
Sound: Advanced Linux Sound Architecture v: k4.4.0-31-generic
Network: Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too v: 0.9.28 port: bc00 bus-ID: 03:03.0
IF: enp3s3 state: unknown speed: 100 Mbps duplex: full
mac: <filter>
Drives: HDD Total Size: 220.1GB (4.7% used)
ID-1: /dev/sda model: ST3160815A size: 160.0GB
ID-2: /dev/sdb model: ST360021A size: 60.0GB
Partition: ID-1: / size: 146G used: 5.9G (5%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 472M used: 101M (23%) fs: ext2 dev: /dev/sda1
ID-3: swap-1 size: 1.07GB used: 0.07GB (6%) fs: swap dev: /dev/dm-1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 154 Uptime: 1:44 Memory: 433.8/1000.1MB
Init: systemd runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.3.461) inxi: 2.2.35
- Attachments
-
- Screenshot from 2016-07-25 19-07-15.png (17.3 KiB) Viewed 1198 times